
High quality special shape steel grating
Product Description
As produced, stainless steel products typically display discoloration caused by the introduction of heat during welding, cutting or grinding processes. If appearance is important to your application, consideration should be given to secondary cleaning or electro-polishing.
![]() |
![]() |
![]() |
Mill FinishProducts will display discoloration from welding, cutting and grinding. Satisfactory for industrial or process applications where appearance is not a consideration. |
Commercial CleanA uniform, matte finish is achieved by abrasive blasting followed by passivation to remove manufacturing contaminants. |
Electro-PolishedA bright, chrome-like appearance achieved by immersion in chemicals that clean and “polish” the base metal. |
Riveted Gratings
Riveted Gratings are manufactured by cold-press riveting straight bearing bars to crimped rectangular flat bars. Our oldest products, riveted gratings offer superior resistance to impact, fatigue and repetitive loads.
Materials
Riveted gratings are available in carbon steel, 6000 series aluminum and 300 series stainless steels. These products are manufactured with bearing bars spaced either 1-1/8" or 3/4" apart and the standard rivet spacing is 7 inches on center. Optional close rivet spacing of 3-1/2" on center is also available.
Serrated Surface
The standard method of manufacturing serrated riveted grating is to serrate the crimped cross member. When assembled, these cross members are raised slightly above the top surface of the bearing bars to provide a superior unidirectional slip-resistant surface. If your application is particularly prone to unsafe walking conditions, consider specifying "100% Serrated" grating where both the bearing bars and cross members are provided with serrations.
Type A - composed of a top board with double hook,a holding down plate with teeth and an M10 (or M8) inner-hexagon-bolt.
Type B - composed of a top board with double hook(where one hook can draw together two neighboring steel gratings),a holding down plate with teeth and a M10(or M8) inner-hexagon-bolt.
Type C - composed of a top board with double hook and a M10 (or M8) hexagon-bolt which can be welded in the supporting structure.
Specification
Application Cases
Customer Visiting
Tianjin Shunjinhua Machinery Manufacturing Co Ltd