Tianjin Shunjinhua Machinery Manufacturing Co Ltd
86-022-68900512
86-022-68900512
86-022-68900512
Special-shaped steel grating
Description
Special-shaped steel grille can be assembled into circular, trapezoidal, semi-circular, triangular, fan-shaped. Solid grid welding makes it have the characteristics of high load-bearing, light structure, easy to hoist, beautiful appearance and durability. Can be customized according to user requirements, design, provide guidance for installation.
Application
Special-shaped steel grille is suitable for alloy, building materials, power plants, boilers, shipbuilding, petrochemical, chemical and general industrial plants, municipal construction, etc. It has ventilation, light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy to clean, easy to install and so on. Nowadays, the state has strengthened the control of pollution. Desulfurization, acid removal and dust removal equipment have become necessary environmental protection equipment in some polluted enterprises. The special-shaped steel grille, which is usually fan-shaped, is used in the operation platform of these environmental protection equipment.
Steel grating standards
China YB/T4001.1-2007(YB/T4001-1998)
British BS4592-1:1995
USA ANSI/NAAMM(MBG531-2000)
Australia AS1657-1992
Hot Dip Galvanizing Standard
China GB/T13912-2002
British BS 729
USA ASTM A123/A123M-97a
Australia AS1650
surface treatment
Hot-dip galvanizing is a form of galvanization.It is the process of coating steel grating with a thin zinc layer,by passing the metal through a molten bath of zinc Mean coating thickness is 70μm when steel bars range from 3mm to 5mm in thickness.
Installation of steel grating
For installation, two fastening methods can be used welding or using saddle clips, For permanent and non-removed installations, the steel gratings are tack-welded to supporting steel. As for the location for welding please see the scheme below, At the four corners of panel, the first bearing bar is tack-welded to the support member with 3mm min filet weld x20r min long.Saddle clips, which have such advantages as not destroying zinc coal and easy removing, are available. Each panel shall use at least four saddle clips For the larger panels preferably a few more clips are used to fix to the available support members. When selecting saddle clips, please refer to the following table.
| Specifications of Special Shaped Steel Gratings | ||
| No | Item | Description |
| 1 | Bearing bar | 20x5, 25x3, 25x4, 25x5, 30x3, 30x4, 30x5, 32x3, 32x5, 40x5, 50â¦75x8mm, etc. |
| 2 | Bearing bar pitch | 25, 30, 30.16, 32.5, 34.3, 40, 50, 60, 62, 65mm, etc |
| 3 | Cross Bar |
5x5, 6x6, 8x8mm (twisted bar or round bar) |
| 4 | Cross bar pitch | 40, 50, 60, 65, 76, 100, 101.6, 120, 130mm or as customersâ requirement. |
| 5 | Surface treatment | Untreated, Hot dip galvanized, Cold dip galvanized, Painted, Powder coated, or as customersâ requirement |
| 6 | Flat bar type | Plain, Serrated (tooth-like), I bar (I section) |
| 7 | Material standard | Low carbon steel (CN: Q235,Q195, US: A36, UK: 43A) |
| 8 | Galvanization standard | CN: GB/T13912, US: ASTM (A123), UK: BS729 |
| 9 | Steel grating standards | A. China: YB/T4001-1998 B. USA: ANSI/NAAMM (MBG 531-88) C. UK: BS4592-1987 D. Australia: AS1657-1988 |
Packing of steel grating
Panels are bundle in a way most appropriate for handle by means of fork-lift or crane rope:two square lumbers are placed on the top and bottom of the bundle respectively. Six or four long bolts of M8 or M10 penetrate through the openings of the gratings and fasten the panels up.For the steel gratings of 3mm thick bearing bars,four pieces of angle steel are added between the bottom square lumber and the panel,to prevent from deformation when hoisting.Besides,special packaging standard as customerâs requirement are also available.
Tianjin Shunjinhua Machinery Manufacturing Co Ltd
